Характеристики
- Напряжение до
- 220 V AC
- Напряжение от
- 240 V AC
- Припой - Горячий воздух
- yes
- Кондиционер паяного типа
- Цифровой
- Припой - показания реальной температуры
- yes
Прочие свойства
- Бренд
- WEP
Свойства
- Температура
- 200 - 480 °C
Технические характеристики
- Номинальная мощность
- 700 W
Описание
WEP 992D soldering station hot air iron and tip-based soldering iron with capacity of 75 W. The device is equipped with a microcontroller unit with the PID driver, which checks the performance and adjusts it to the preset values. Models 992D are characterized by:
- The operation of the hot air in auto mode- when you put down the iton, the system will turn off the heat and cool the iton to a safe temperature.
- The function of temperature correction depending on external parameters.
- Mode C/Fthe ability to change the units in which temperature is displayed.
- Sleep function of soldering iron tip-based - if the iron is not used the given time interval (0 - 99 minutes) the system switches to sleep mode, that is cooled to a temperature of 200 °C, which ensures long service life of the device.
- Ceramic heating element- soldering iron hotair has a ceramic heating element that quickly and evenly heats up. The heater consists of hard alloys, which allows for a long operation time at high temperatures with no deformation, which increases the stability and prolongs the service life of the heater.
- Easy to read LCD display- temperature, power, airflow and operation mode are displayed on a large, easily readable LCD display.
- Voltage: 220 - 240 V / 50 Hz (network)
- Power consumption: 700 W
- The station is controlled through a microcontroller that provides high stability
- The device has a PID controller
- Compact design with large and clear LCD display
- Soldering Iron Hotair:
- Blowing air through the compressor inside the station
- Air consumption: up to 28 L/min
- Smooth adjustmentof temperature in the range
- Adjustable temperature of hot air: 100-480 °C
- Temperature stability: +/-1 °C
- LCD display showing the actual power and temperature of blowing
- Temperature setting buttons
- Protection before reaching the high temperature and inform the alarm
- Length of iron cable: up to 90 cm
- Tip-based Soldering Iron
- Iron 908B
- Adjustable temperature soldering tip: 200°Cto 480 °C
- Temperature stability: +/- 1 °C
- Soldering iron power: 75 W
- The resistance to grounding: up to 2 Ω
- Potencjał regarding grounding: up to 2 mV
- System ESD safe
- Cable length of the iron: up to 100 cm
- Sleep mode: enabled after idle operation 0-99 minutes
Includes:
- Station WEP 992D
- Stand for hotair iron
- Set of nozzles:
- round 2.5 mm
- round with a diameter of 4.4 mm
- round with a diameter of 7 mm
- round with a diameter of 9 mm
- square 12x12 mm
- Stand for tip-based soldering iron along with a cleaning sponge
- Stand for the tin
- Soldering iron 907I with tip T-B
- A gripper for lifting circuits
- Power cable
First run
- You should not run the device immediately after delivery.
- Equipment must remain for about 12 hours at room temperature before switching on.
- All complaints caused by running of the equipment too soon will be denied.
- You must completely remove the screw/screws from the bottom of the station if the compressor is the source of air supply. These screws are marked in red (1 or 3 screws depending on model).
Note
Heating elements (heaters) and tips are not subject to warranty, you should purchase new ones.
Our range of accessories for soldering:
- soldering tin of various diameters
- fluxes and rosins
- braids to remove excess tin
- suckers
- soldering tips
- tweezers, holders, magnifying glass
- sponges and cleaners
Доставка
Доставим товар из Германии от поставщика DESTE FZ LLC курьерской службой, в отделение Почты или пункт выдачи в вашем городе. Доставка в Армению, Казахстан, Грузию и Киргизию будет осуществлена доступными службами. Вы сможете выбрать желаемый способ доставки заказа в момент его оформления. Стоимость доставки зависит от выбранного вами метода и составит от 80 руб. Заказ будет доставлен за 10-30 дней, срок зависит от выбранного города. Если вы закажете этот товар прямо сейчас, доставим его 19 мая - 8 июня.
Доставка электроинструментов WEP напрямую из Германии в Москву, Санкт-Петербург, Новосибирск, Екатеринбург, Казань, Нижний Новгород, Челябинск, Самара, Уфа, Ростов, Омск, Красноярск, Воронеж и другие города России осуществляется надежными и проверенными нами службами доставки.
Как только заказ будет отправлен к вам с нашего склада, отслеживание заказа по номеру посылки станет доступным.
Мы выстраиваем выгодные партнерские отношения с поставщиками электроинструментов WEP и отобрали для вас лучших производителей брендовых товаров из Европы, Америки, Турции и ОАЭ, специализируясь на аутлетах и дискаунтерах. Прямая доставка из-за рубежа до покупателя нашими логистическими решениями — это оптимизированные и экономичные решения, вы не переплачиваете в цене товара за расходы на торговые помещения и шоурумы. Заказ будет отправлен напрямую с нашего склада по указанному вами адресу, по цене недоступной для местных магазинов.
Оригинальные брендовые товары в широком ассортименте с вкусными скидками — так можно описать наш интернет магазин. Доставка заказа будет отслеживаться на всех этапах покупки и работает сразу после оплаты заказа.