VL53L5CX time-of-flight - 8x8 distance sensor I2C - 400cm - Pololu 3417

VL53L5CX laser distance sensor measuring in the range from 0.1 cm to 400 cm using the Time-of-Fligh t method via the I2C interface. With it, it is possible to measure the absolute distance of many objects simultaneously in many zones, providing enough data to create a depth map with a resolution of 8x8 . The board is equipped with a voltage regulator of 3.3 V, and its supply voltage can be from 2.8 V to 5.5 V. The leads are popular goldpin connectors that allow you to connect the sensor with wires or directly attach it to the contact plate . The kit includes connectors for self-soldering. It is not recommended for use with 8-bit microcontrollers like Arduino Uno.

The pins of the module.

• VDD - regulated output voltage of the sensor 3.3 V
• VIN - module supply voltage in the range of 2.8 V to 5.5 V
• GND - the ground of the system
• SDA - data line of the I2C communication interface
• SCL - clock line of the I2C communication interface
• LPn - giving a low state will turn off I2C communication, by default pulled up to VDD to activate I2C
• INT - external interrupt output
• I2C_RST - specifying high status resets I2C, by default pulled up to GND

• Supply voltage: from 2.8 V to 5.5 V
• Current consumption: 100 mA (max. 150 mA)
• Communication interface: I2C (TWI)
• Minimum measurement range: 0.1 cm
• Maximum measuring range: up to 400 cm
• Resolution: 1mm depth, 4x4 or 8x8 sensor zones
• Wavelength: 940 nm
• Viewing Angle (FOV): 63 ° diagonal (45 ° vertical / horizontal)
• Output format (I2C): histogram
• Housing: lead-free LGA
• Module dimensions: 13 x 18 x 2 mm
• Weight: 0.5 g

• 1x VL53L5CX time-of-flight - 8x8 I2C distance sensor - 400cm - Pololu 3417
• 1x simple goldpin strip 1x 8-pin
• 1x angled goldpin strip 1 x 8-pin

• Manufacturer's website: Pololu 3417
• Schemes
• Technical documentation VL53L5CX