VISION CS-1900P 6.5´´ Ceiling Speaker

The CS-1900P are based on Vision’s passive ceiling loudspeakers but have a powerful 70 watt amplifier built in. Easy to use and virtually invisible, these professional-grade loudspeakers are ideal for meeting spaces that can be divided, or at home. Bluetooth: - Easy to connect to. Bluetooth can be disabled via the remote control or RS-232. Rename Bluetooth, Set Pin: - Connect via USB and run software (see downloads tab) to rename and set the pin. The speakers stores the details for up - to eight paired devices. Even if you change the PIN these eight devices will still connect without needing the new pin. When you pair a 9th device the 1st device will need to enter the password again to connect. Auto-Switching: - Choose to change to the Bluetooth input automatically when a device is paired, or manually switch. Remote Control: - An included IR remote control gives the user full control, including bass and treble adjustment. IR Front and Rear: - Switch between the front IR receiver, or the rear IR receiver if using a wired control system, or off. Master/Slave: - The amplifier is housed in the “master” loudspeaker which has the connection panel, and a speaker output connects to the included passive “slave” loudspeaker. Daisy-Chain: - If you require two pairs for the room an audio output allows you to pass the audio signal on to a second pair of CS-1900P. In fact you can daisy-chain as many pairs as you need using this line-level audio output. RS-232: - For integration into a controlled audio-visual environment they can be controlled with RS-232 (serial) codes. Vision´s Techconnect Control can be used to control them. Memory: - When power is turned on at the wall the CS-1900P automatically turn on and resumes the previous input and volume setting. 2-Way with Kevlar Driver: - Two-way woofer and tweeter design with quality materials and a passive cross-over for superior audio. Auto-Standby: - If the amplifier senses no input for ten minutes it will automatically go into standby mode. Bluetooth device NOT PAIRED when it goes into standby: they will wake up when you pair a device or play audio though the line-level input.Bluetooth device PAIRED when it goes into standby: if the BT input was selected only the Bluetooth source will wake them up. If the line-level input was selected only a line-level input will wake them up. Automatic standby can be disabled with the remote control. Magnetic Grille: - The bezel-less grille clips into place once the speakers are secured. Simple to fit: - A cutout template is included so the installer can easily trace the cut line in the ceiling tile. Cut a 198 mm hole and fit the speaker; it’s quick and easy. Features: - Integrated 2 x 35 watt (RMS) amplifier - 1 x wired input / 1 x Bluetooth input - Switches between stand alone or daisy-chain mode - IR remote included - BT can be disabled Specifications: - Loudspeaker Dimensions: 232 X 95 Mm (diameter 224 Mm Without Grille) - Cutout Size: 198 Mm - Carton Dimensions: 253 X 253 X 273 Mm - Speaker Weight Master: 1.3 Kg - Speaker Weight Slave: 1.2 Kg - Carton Weight: 4.0 Kg (per Pair) - Construction Material: Plastic (abs) - Amplifier Output: 2 X 35 Watts (rms) - Woofer: 6.5″ Kevlar - Tweeter: 0.5″ Silk - Output Impedance: 8 Ohms - Sensitivity: 89 Db (1w/1m) - Frequency Response: 80 Hz-20 Khz - Power Consumption: ≤ 70 W - Line-level Input: 1 X 2-phono And 1 X 3.5mm Minijack (summed) - Speaker Output: Phoenix Connector - Daisy-chain Input: 3.5mm Minijack - Daisy-chain Output: 3.5mm Minijack Speaker Input: - Phoenix Connector Accessories Included: - 1 X Speaker Cable 5 M Long - 1 X Remote Control (battery Included: Cr2025 3v Li-mn) - Power Supply: 100-240v 50/60hz Ac External Power Supply – 24 Volt / 3 Amp - Dc Tail Length: 1.5m - Transformer Dimensions: 120 X 52 X 32 Mm