Filament Print-Me Smooth ABS 1,75mm 0,2kg - Cherry Red

Description: Filament Print-Me Smooth ABS 1.75 mm 0.2 kg - Cherry Red

The Smooth ABS filter is a Cherry Red insert.for 3D printers. The net weight of the filament wound on the spool is 200 g. Anyone who is not familiar with the subject of additive technologies is well aware that for a printed model to have good detail and durability, it must be made of high-quality material. That is why it is worth betting on products of proven manufacturers. Smooth ABSis a material that provides high quality three-dimensional prints. It is distinguished by its versatile use, intensivecolour and relativeease of printing. Thanks to the Smooth ABS pillarCherry Red with diameter1.75 mmyou will be able to create models of varying degrees of complexity. This will work for most popular 3D printers for amateur home use and more.

In our offer of filaments you will also find other materials and colors.

In our offer you will find more types of Phillips by Print-Me manufacturerin different colors, so you're sure to find exactly what you're looking for here. Our assortment consists of carefully selected filaments for different applications - check out our other suggestions! All materials are available from us at favourable prices.

Properties of Smooth ABS

• Excellent adhesion between layers
• Material for advanced users
• Glossy surface after printing
• No flossing effect
• Perfectly smooth print surface
• High dimensional accuracy of the printed component
• Very high impact resistance and mechanical strength

Suggested print parameters for filament Head temperature From 220°C to 260°C Table temperature From 80°C to 120°C Cooling the printout 0% to 30% Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally. Technical specifications and physical properties of the Print-Me Smooth ABS pillar Parameter Scope Diameter of pillar 1.75 mm Dimensional tolerances of the philanthropy +/- 0,05 mm Material surface Gloss Density 1.01 g/cm3 Thermal resistance 90°C Shore hardness 74D Impact resistance for V notch 1.4 J/cm2 Young's module 2086 MPa Retraction +/- 5 mm Nozzle diameter ≥ 0,1 mm Print speed From 30 to 80 mm/s Material contraction 0,3 - 0,4 % Product weight 200 g net Spool - material Transparent polycarbonate Vacuum packing Yes Moisture absorber Yes Useful links

• Print-Me manufacturer's website
• What is 3D printing
• Filaments in 3D printing