Digital Distance Sensor 200cm - Pololu 4077

Бестселлер
46852409
33 $

Мы выстраиваем выгодные партнерские отношения с поставщиками робототехники и Stem-игрушек Pololu и отобрали для вас лучших производителей брендовых товаров из Европы, Америки, Турции и ОАЭ, специализируясь на аутлетах и дискаунтерах. Прямая доставка из-за рубежа до покупателя нашими логистическими решениями — это оптимизированные и экономичные решения, вы не переплачиваете в цене товара за расходы на торговые помещения и шоурумы. Заказ будет отправлен напрямую с нашего склада по указанному вами адресу, по цене недоступной для местных магазинов.

Оригинальные брендовые товары в широком ассортименте с вкусными скидками — так можно описать наш интернет магазин. Доставка заказа будет отслеживаться на всех этапах покупки и работает сразу после оплаты заказа.

  • Бренд Pololu
  • Доставка из Польши
  • Почтовая доставка 15 июня
  • Стоимость доставки заказа в США от 45 $

Сроки доставки указаны ориентировочно и зависят от региона доставки. Подробнее на этой странице

Характеристики

Напряжение до
3.0 V
Датчик - расстояние от
0.1 cm

Общие характеристики

Напряжение от
5.5 V
Датчик - расстояние до
200 см

Порты и интерфейсы

Подключение
Digital I / O

Прочие свойства

Бренд
Pololu

Описание

Product description: Digital distance sensor 200 cm - Pololu 4077

Pololu brand module withdistance sensorbased onLidartechnology. The sensor has an operating range ofup to 200cm and is poweredfrom 3 V to 5.5 V. It is equipped with one digital output which changes its state to low when an object is detected. Itis not capable of measuring distances, it only reports the detection of an obstacle within 200 cm with an accuracy of1 mm. This sensor uses a short-range Lidar module toaccurately measurethe time it takes for the emitted pulses of eye-safe infrared light to reach the nearest object and be reflected back.

Application example
  • Alternative brake light sensor and photobeam
  • Non-contact sensor for robot collision or obstacle
  • A non-contact interface element to activate a device or process
  • Counter or timer for objects as they pass by
Infrared light emitted by the sensor, recorded with a camera without IR filter.
Digital distance sensor 200 cm.
Using the distance sensor

The board has 3 leads:VIN, GND and OUT.Pins are located on the board in the form of holes with a 2.54 mm pitch, with the possibility of solderinggoldpin connectors(not included). VIN pin should be provided with voltage from3V to 5.5V, GND is system ground pin (0V). OUT pin triggers low state (0 V) when an object is detected and high state (up to VIN level) when an object is not detected. TheredLEDalso lights up when an object is detected. The board also features an ENABLE pin that can be set low to put it into a low power state, which consumes about 0.4 mA of current. The ENABLE pin is pulled up to VIN by default.

There is a protective film on the sensor that must be removed before working with the module.

Jumper settings on the sensor module

The module is equipped with four surface mount configuration jumpers (4321) that define its operating modes. Various versions of Pololu sensors have jumpers set appropriately in the form of 0 Ω resistors. The resistors can be soldered out or bridges can be added to convert one version of the sensor to another. This sensor can be converted to any other version of irs17a according to the table below.

Pin and jumper layout of the distance sensor module.
Product Description Range max. Hysteresis Distribution Minimum update frequency Jumper settings (4321) #4066 Digital output, 25 cm 25 cm 50 mm - 100 Hz 0000 #4067 Digital output, 50 cm 50 cm 50 mm - 100 Hz 0001 Digital output, 75 cm 75 cm 50 mm - 100 Hz 0010 #4069 Digital output, 100 cm 100 cm 50 mm - 100 Hz 0011 Digital output, any detection ~130 cm - - 100 Hz 0010 #4071 PWM output, max. 130 cm ~130 cm - 1 mm (- 0.5 µs) 100 Hz (max. 110 Hz) 0101 Digital output, 125 cm 125 cm 50 mm - 30 Hz 1000 Digital output, 150 cm 150 cm 50 mm - 30 Hz 1001 Digital output, 175 cm 175 cm 50 mm - 30 Hz 1010 #4077 Digital output, 200 cm 200 cm 50 mm - 30 Hz 1011 Digital output, any detection ~300 cm - - 30 Hz 1100 #4079 PWM output, max. 300 cm ~300 cm - 2 mm (= 0.5 µs) 30 Hz (max. 33 Hz) 1101
Comparison of Pololu and Sharp sensors.
Comparison with Sharp sensor

The Pololu distance sensor modules have the sameshape and leadsas theSharpsensors. They are available in the same and larger sensing ranges. This means that they can be usedinterchangeably. The sensors in the newer Pololu devices aremuch thinnerthan the Sharp modules, so the zero point is about 7mm closer to the board and the beam angle is wider in the newer devices.

Pololu distance sensor specifications
  • Supply voltage: 3 V to 5.5 V
  • Current consumption: 30 mA (typical) when switched on, 0.4 mA when switched off
  • Maximum range: 200 cm
  • Minimum range: up to 1 mm
  • Minimum update rate: 100 Hz (10 ms period)
  • Field of View (FOV): typically 15°, may vary depending on object reflection and environmental conditions
  • Output Type: digital signal (low when object detected, high otherwise)
  • Dimensions: 21.6 x 8.9 x 3.5 mm
  • Weight: 0.4 g
>Output signal schematic.
Useful links
  • Manufacturer's website: Pololu #4077
  • Schematic diagram
  • 3D model

Доставка

Доставим товар из Германии от поставщика DESTE FZ LLC курьерской службой, в отделение Почты или пункт выдачи в вашем городе. Доставка в Армению, Казахстан, Грузию и Киргизию будет осуществлена доступными службами. Вы сможете выбрать желаемый способ доставки заказа в момент его оформления. Стоимость доставки зависит от выбранного вами метода и составит от 45 руб. Заказ будет доставлен за 10-30 дней, срок зависит от выбранного города. Если вы закажете этот товар прямо сейчас, доставим его 4 июня - 24 июня.

Доставка робототехники и Stem-игрушек Pololu напрямую из Германии в Москву, Санкт-Петербург, Новосибирск, Екатеринбург, Казань, Нижний Новгород, Челябинск, Самара, Уфа, Ростов, Омск, Красноярск, Воронеж и другие города России осуществляется надежными и проверенными нами службами доставки.

Как только заказ будет отправлен к вам с нашего склада, отслеживание заказа по номеру посылки станет доступным.