Digital Distance Sensor 130cm PWM - Pololu 4071

Бестселлер
46852408
33 $

Мы выстраиваем выгодные партнерские отношения с поставщиками электроники Pololu и отобрали для вас лучших производителей брендовых товаров из Европы, Америки, Турции и ОАЭ, специализируясь на аутлетах и дискаунтерах. Прямая доставка из-за рубежа до покупателя нашими логистическими решениями — это оптимизированные и экономичные решения, вы не переплачиваете в цене товара за расходы на торговые помещения и шоурумы. Заказ будет отправлен напрямую с нашего склада по указанному вами адресу, по цене недоступной для местных магазинов.

Оригинальные брендовые товары в широком ассортименте с вкусными скидками — так можно описать наш интернет магазин. Доставка заказа будет отслеживаться на всех этапах покупки и работает сразу после оплаты заказа.

  • Бренд Pololu
  • Доставка из Польши
  • Почтовая доставка 26 мая
  • Стоимость доставки заказа в США от 56 $

Сроки доставки указаны ориентировочно и зависят от региона доставки. Подробнее на этой странице

Характеристики

Напряжение от
5.5 V
Напряжение до
3.0 V

Общие характеристики

Датчик - расстояние от
0.1 cm
Датчик - расстояние до
130 см

Прочие свойства

EAN
5904422349066
Бренд
Pololu

Свойства

Подключение
Digital I / O

Описание

Product description: Digital distance sensor 130 cm PWM - Pololu 4071

Adistancesensor board based onLidartechnology. The sensor detects objectsup to 130cm and is poweredfrom 3 V to 5.5 V. It is equipped with one digital PWM output whose signal is similar to the servo control signal. A digital microcontroller pin can be used to measure the duration of each high pulse, which encodes the measured distance. Short range Lidar technology is used toaccurately measurethe time it takes for the emitted pulses of eye-safe infrared light to reach the nearest object and be reflected back. As long as the sensor is operating, it takes continuous distance measurements and encodes the ranges as high pulse widths, which can then be synchronized by the microcontroller using a single digital input. A maximum range of 130 cm is only achievable for high reflectance targets in good environmental conditions. Targets with lower reflectivity or poor environmental conditions reduce the maximum range.

The manufacturer has also preparedsampleprogramcodesfor Arduino andBBC micro:bit.
Infrared light emitted by the sensor, recorded with a camera without IR filter.
Digital distance sensor 130 cm.
Using the distance sensor

The module has 3 leads:VIN, GND and OUT,in the form of holes with a 2.54 mm raster, with solderablegoldpin connectors(not included). VIN pin is used to power the modulefrom 3V to 5.5V, GND is a ground pin (0V). Digital pulses are sent to OUT pin. The low level of the pulses is 0 V and the high level is the voltage value from VIN. AredLEDalso lights up when an object is detected, andit lights up brighter when the object is closer to the sensor.There is also an ENABLE pin on the board that can be set low to put it into a low power state, which consumes about 0.4 mA of current. The ENABLE pin is pulled up to VIN by default.

There is a protective film on the sensor that must be removed before working with the module.

Jumper settings on the sensor module

The board contains four surface mount configuration jumpers (4321) that determine its operating modes. Different versions of Pololu sensors have the jumpers set appropriately as 0 Ω resistors. The resistors can be soldered out or bridges can be added to convert one version of the sensor into another. This sensor can be converted to any other version of irs17a according to the table below.

Pin and jumper layout of the distance sensor module.
Product Description Range max. Hysteresis Distribution Minimum update frequency Jumper settings (4321) #4066 Digital output, 25 cm 25 cm 50 mm - 100 Hz 0000 #4067 Digital output, 50 cm 50 cm 50 mm - 100 Hz 0001 Digital output, 75 cm 75 cm 50 mm - 100 Hz 0010 #4069 Digital output, 100 cm 100 cm 50 mm - 100 Hz 0011 Digital output, any detection ~130 cm - - 100 Hz 0010 #4071 PWM output, max. 130 cm ~130 cm - 1 mm (- 0.5 µs) 100 Hz (max. 110 Hz) 0101 Digital output, 125 cm 125 cm 50 mm - 30 Hz 1000 Digital output, 150 cm 150 cm 50 mm - 30 Hz 1001 Digital output, 175 cm 175 cm 50 mm - 30 Hz 1010 #4077 Digital output, 200 cm 200 cm 50 mm - 30 Hz 1011 Digital output, any detection ~300 cm - - 30 Hz 1100 #4079 PWM output, max. 300 cm ~300 cm - 2 mm (= 0.5 µs) 30 Hz (max. 33 Hz) 1101
Comparison of Pololu and Sharp sensors.
Comparison with Sharp sensor

The Pololu sensor modules have the sameshape and pin-outsasthe Sharp modules. They are available with the same and larger sensing ranges, which means that they can be usedinterchangeably. The sensors on the newer Pololu devices aremuch thinnerthan the Sharp modules, so the zero point is about 7mm closer to the board, and the beam angle on the newer devices is wider.

Pololu distance sensor specifications
  • Supply voltage: 3 V to 5.5 V
  • Current consumption: 30 mA (typical) when switched on, 0.4 mA when switched off
  • Maximum range: 130 cm
  • Minimum range: up to 1 mm
  • Minimum update rate: 100 Hz to 110 Hz (10 ms to 9 ms period)
  • Field of View (FOV): typically 15°, may vary depending on object reflection and environmental conditions
  • Output Type: PWM
  • Dimensions: 21.6 x 8.9 x 3.5 mm
  • Weight: 0.4 g
Output signal diagram.
Useful links
  • Manufacturer's website: Pololu #4071
  • Schematic diagram
  • 3D model

Доставка

Доставим товар из Германии от поставщика DESTE FZ LLC курьерской службой, в отделение Почты или пункт выдачи в вашем городе. Доставка в Армению, Казахстан, Грузию и Киргизию будет осуществлена доступными службами. Вы сможете выбрать желаемый способ доставки заказа в момент его оформления. Стоимость доставки зависит от выбранного вами метода и составит от 56 руб. Заказ будет доставлен за 10-30 дней, срок зависит от выбранного города. Если вы закажете этот товар прямо сейчас, доставим его 15 мая - 4 июня.

Доставка электроники Pololu напрямую из Германии в Москву, Санкт-Петербург, Новосибирск, Екатеринбург, Казань, Нижний Новгород, Челябинск, Самара, Уфа, Ростов, Омск, Красноярск, Воронеж и другие города России осуществляется надежными и проверенными нами службами доставки.

Как только заказ будет отправлен к вам с нашего склада, отслеживание заказа по номеру посылки станет доступным.